IEC61970::Base::Wires::ExternalNetworkInjection Class Reference

#include <ExternalNetworkInjection.h>

Inheritance diagram for IEC61970::Base::Wires::ExternalNetworkInjection:

Collaboration diagram for IEC61970::Base::Wires::ExternalNetworkInjection:

Public Attributes
IEC61970::Base::Domain::ActivePowerPerFrequency	governorSCD
IEC61970::Base::Domain::Boolean	ikSecond
IEC61970::Base::Domain::CurrentFlow	maxInitialSymShCCurrent
IEC61970::Base::Domain::ActivePower	maxP
IEC61970::Base::Domain::ReactivePower	maxQ
IEC61970::Base::Domain::Float	maxR0ToX0Ratio
IEC61970::Base::Domain::Float	maxR1ToX1Ratio
IEC61970::Base::Domain::Float	maxZ0ToZ1Ratio
IEC61970::Base::Domain::CurrentFlow	minInitialSymShCCurrent
IEC61970::Base::Domain::ActivePower	minP
IEC61970::Base::Domain::ReactivePower	minQ
IEC61970::Base::Domain::Float	minR0ToX0Ratio
IEC61970::Base::Domain::Float	minR1ToX1Ratio
IEC61970::Base::Domain::Float	minZ0ToZ1Ratio
IEC61970::Base::Domain::ActivePower	p
IEC61970::Base::Domain::ReactivePower	q
IEC61970::Base::Domain::Integer	referencePriority
IEC61970::Base::Domain::PU	voltageFactor
Public Attributes inherited from IEC61970::Base::Wires::RegulatingCondEq
IEC61970::Base::Domain::Boolean	controlEnabled
IEC61970::Base::Wires::RegulatingControl *	RegulatingControl
Public Attributes inherited from IEC61970::Base::Core::Equipment
IEC61970::Base::Domain::Boolean	aggregate
IEC61970::Base::Domain::Boolean	inService
IEC61970::Base::Domain::Boolean	normallyInService
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

This class represents external network and it is used for IEC 60909 calculations.

Member Data Documentation

governorSCD

IEC61970::Base::Domain::ActivePowerPerFrequency IEC61970::Base::Wires::ExternalNetworkInjection::governorSCD

Power Frequency Bias. This is the change in power injection divided by the change in frequency and negated. A positive value of the power frequency bias provides additional power injection upon a drop in frequency.

ikSecond

IEC61970::Base::Domain::Boolean IEC61970::Base::Wires::ExternalNetworkInjection::ikSecond

Indicates whether initial symmetrical short-circuit current and power have been calculated according to IEC (Ik").

maxInitialSymShCCurrent

IEC61970::Base::Domain::CurrentFlow IEC61970::Base::Wires::ExternalNetworkInjection::maxInitialSymShCCurrent

Maximum initial symmetrical short-circuit currents (Ik" max) in A (Ik" = Sk"/(SQRT(3) Un)). Used for short circuit data exchange according to IEC 60909

maxP

IEC61970::Base::Domain::ActivePower IEC61970::Base::Wires::ExternalNetworkInjection::maxP

Maximum active power of the injection.

maxQ

IEC61970::Base::Domain::ReactivePower IEC61970::Base::Wires::ExternalNetworkInjection::maxQ

Not for short circuit modelling; It is used for modelling of infeed for load flow exchange. If maxQ and minQ are not used ReactiveCapabilityCurve can be used

maxR0ToX0Ratio

IEC61970::Base::Domain::Float IEC61970::Base::Wires::ExternalNetworkInjection::maxR0ToX0Ratio

Maximum ratio of zero sequence resistance of Network Feeder to its zero sequence reactance (R(0)/X(0) max). Used for short circuit data exchange according to IEC 60909

maxR1ToX1Ratio

IEC61970::Base::Domain::Float IEC61970::Base::Wires::ExternalNetworkInjection::maxR1ToX1Ratio

Maximum ratio of positive sequence resistance of Network Feeder to its positive sequence reactance (R(1)/X(1) max). Used for short circuit data exchange according to IEC 60909

maxZ0ToZ1Ratio

IEC61970::Base::Domain::Float IEC61970::Base::Wires::ExternalNetworkInjection::maxZ0ToZ1Ratio

Maximum ratio of zero sequence impedance to its positive sequence impedance (Z(0)/Z(1) max). Used for short circuit data exchange according to IEC 60909

minInitialSymShCCurrent

IEC61970::Base::Domain::CurrentFlow IEC61970::Base::Wires::ExternalNetworkInjection::minInitialSymShCCurrent

Minimum initial symmetrical short-circuit currents (Ik" min) in A (Ik" = Sk"/(SQRT(3) Un)). Used for short circuit data exchange according to IEC 60909

minP

IEC61970::Base::Domain::ActivePower IEC61970::Base::Wires::ExternalNetworkInjection::minP

Minimum active power of the injection.

minQ

IEC61970::Base::Domain::ReactivePower IEC61970::Base::Wires::ExternalNetworkInjection::minQ

Not for short circuit modelling; It is used for modelling of infeed for load flow exchange. If maxQ and minQ are not used ReactiveCapabilityCurve can be used

minR0ToX0Ratio

IEC61970::Base::Domain::Float IEC61970::Base::Wires::ExternalNetworkInjection::minR0ToX0Ratio

Indicates whether initial symmetrical short-circuit current and power have been calculated according to IEC (Ik"). Used for short circuit data exchange according to IEC 6090

minR1ToX1Ratio

IEC61970::Base::Domain::Float IEC61970::Base::Wires::ExternalNetworkInjection::minR1ToX1Ratio

Minimum ratio of positive sequence resistance of Network Feeder to its positive sequence reactance (R(1)/X(1) min). Used for short circuit data exchange according to IEC 60909

minZ0ToZ1Ratio

IEC61970::Base::Domain::Float IEC61970::Base::Wires::ExternalNetworkInjection::minZ0ToZ1Ratio

Minimum ratio of zero sequence impedance to its positive sequence impedance (Z(0)/Z(1) min). Used for short circuit data exchange according to IEC 60909

p

IEC61970::Base::Domain::ActivePower IEC61970::Base::Wires::ExternalNetworkInjection::p

Active power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

q

IEC61970::Base::Domain::ReactivePower IEC61970::Base::Wires::ExternalNetworkInjection::q

Reactive power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

referencePriority

IEC61970::Base::Domain::Integer IEC61970::Base::Wires::ExternalNetworkInjection::referencePriority

Priority of unit for use as powerflow voltage phase angle reference bus selection. 0 = don t care (default) 1 = highest priority. 2 is less than 1 and so on.

voltageFactor

IEC61970::Base::Domain::PU IEC61970::Base::Wires::ExternalNetworkInjection::voltageFactor

Voltage factor in pu, which was used to calculate short-circuit current Ik" and power Sk".

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/17v07/refactored/IEC61970/Base/Wires/ExternalNetworkInjection.h
• /home/lukas/acs/gits/CIM/17v07/refactored/IEC61970/Base/Wires/ExternalNetworkInjection.cpp