IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified Class Reference

#include <UnderexcLim2Simplified.h>

Inheritance diagram for IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified:

Collaboration diagram for IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified:

Public Attributes
IEC61970::Base::Domain::PU	kui
IEC61970::Base::Domain::PU	p0
IEC61970::Base::Domain::PU	p1
IEC61970::Base::Domain::PU	q0
IEC61970::Base::Domain::PU	q1
IEC61970::Base::Domain::PU	vuimax
IEC61970::Base::Domain::PU	vuimin
Public Attributes inherited from IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcitationLimiterDynamics
IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcitationSystemDynamics *	ExcitationSystemDynamics
IEC61970::Dynamics::StandardInterconnections::RemoteInputSignal *	RemoteInputSignal
Public Attributes inherited from IEC61970::Dynamics::StandardModels::DynamicsFunctionBlock
IEC61970::Base::Domain::Boolean	enabled
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

This model can be derived from UnderexcLimIEEE2. The limit characteristic (look –up table) is a single straight-line, the same as UnderexcLimIEEE2 (see Figure 10.4 (p 32), IEEE 421.5-2005 Section 10.2).

Member Data Documentation

kui

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified::kui

Gain Under excitation limiter (Kui). Typical Value = 0.1.

p0

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified::p0

Segment P initial point (P0). Typical Value = 0.

p1

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified::p1

Segment P end point (P1). Typical Value = 1.

q0

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified::q0

Segment Q initial point (Q0). Typical Value = -0.31.

q1

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified::q1

Segment Q end point (Q1). Typical Value = -0.1.

vuimax

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified::vuimax

Maximum error signal (V_UImax). Typical Value = 1.

vuimin

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::UnderexcitationLimiterDynamics::UnderexcLim2Simplified::vuimin

Minimum error signal (V_UImin). Typical Value = 0.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Dynamics/StandardModels/UnderexcitationLimiterDynamics/UnderexcLim2Simplified.h
• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Dynamics/StandardModels/UnderexcitationLimiterDynamics/UnderexcLim2Simplified.cpp