IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST Class Reference

#include <GovGAST.h>

Inheritance diagram for IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST:

Collaboration diagram for IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST:

Public Attributes
IEC61970::Base::Domain::PU	at
IEC61970::Base::Domain::PU	dturb
IEC61970::Base::Domain::PU	kt
IEC61970::Base::Domain::ActivePower	mwbase
IEC61970::Base::Domain::PU	r
IEC61970::Base::Domain::Seconds	t1
IEC61970::Base::Domain::Seconds	t2
IEC61970::Base::Domain::Seconds	t3
IEC61970::Base::Domain::PU	vmax
IEC61970::Base::Domain::PU	vmin
Public Attributes inherited from IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::TurbineGovernorDynamics
IEC61970::Dynamics::StandardModels::AsynchronousMachineDynamics::AsynchronousMachineDynamics *	AsynchronousMachineDynamics
Public Attributes inherited from IEC61970::Dynamics::StandardModels::DynamicsFunctionBlock
IEC61970::Base::Domain::Boolean	enabled
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

Single shaft gas turbine.

Member Data Documentation

at

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::at

Ambient temperature load limit (Load Limit). Typical Value = 1.

dturb

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::dturb

Turbine damping factor (Dturb). Typical Value = 0.18.

kt

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::kt

Temperature limiter gain (Kt). Typical Value = 3.

mwbase

IEC61970::Base::Domain::ActivePower IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::mwbase

Base for power values (MWbase) (> 0).

r

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::r

Permanent droop (R). Typical Value = 0.04.

t1

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::t1

Governor mechanism time constant (T1). T1 represents the natural valve positioning time constant of the governor for small disturbances, as seen when rate limiting is not in effect. Typical Value = 0.5.

t2

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::t2

Turbine power time constant (T2). T2 represents delay due to internal energy storage of the gas turbine engine. T2 can be used to give a rough approximation to the delay associated with acceleration of the compressor spool of a multi- shaft engine, or with the compressibility of gas in the plenum of a the free power turbine of an aero-derivative unit, for example. Typical Value = 0.5.

t3

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::t3

Turbine exhaust temperature time constant (T3). Typical Value = 3.

vmax

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::vmax

Maximum turbine power, PU of MWbase (Vmax). Typical Value = 1.

vmin

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovGAST::vmin

Minimum turbine power, PU of MWbase (Vmin). Typical Value = 0.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Dynamics/StandardModels/TurbineGovernorDynamics/GovGAST.h
• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Dynamics/StandardModels/TurbineGovernorDynamics/GovGAST.cpp