IEC61970::Base::Wires::BusbarSection Class Reference

#include <BusbarSection.h>

Inheritance diagram for IEC61970::Base::Wires::BusbarSection:

Collaboration diagram for IEC61970::Base::Wires::BusbarSection:

Public Attributes
IEC61970::Base::Domain::CurrentFlow	ipMax
IEC61970::Base::Wires::VoltageControlZone *	VoltageControlZone
Public Attributes inherited from IEC61970::Base::Core::Equipment
IEC61970::Base::Domain::Boolean	aggregate
IEC61970::Base::Domain::Boolean	inService
IEC61970::Base::Domain::Boolean	networkAnalysisEnabled
IEC61970::Base::Domain::Boolean	normallyInService
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

A conductor, or group of conductors, with negligible impedance, that serve to connect other conducting equipment within a single substation. Voltage measurements are typically obtained from VoltageTransformers that are connected to busbar sections. A bus bar section may have many physical terminals but for analysis is modelled with exactly one logical terminal.

Member Data Documentation

ipMax

IEC61970::Base::Domain::CurrentFlow IEC61970::Base::Wires::BusbarSection::ipMax

Maximum allowable peak short-circuit current of busbar (Ipmax in the IEC 60909- 0). Mechanical limit of the busbar in the substation itself. Used for short circuit data exchange according to IEC 60909

VoltageControlZone

IEC61970::Base::Wires::VoltageControlZone* IEC61970::Base::Wires::BusbarSection::VoltageControlZone

A VoltageControlZone is controlled by a designated BusbarSection.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Base/Wires/BusbarSection.h
• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Base/Wires/BusbarSection.cpp