IEC61970::Base::Equivalents::EquivalentInjection Class Reference

#include <EquivalentInjection.h>

Inheritance diagram for IEC61970::Base::Equivalents::EquivalentInjection:

Collaboration diagram for IEC61970::Base::Equivalents::EquivalentInjection:

Public Attributes
IEC61970::Base::Domain::ActivePower	maxP
IEC61970::Base::Domain::ReactivePower	maxQ
IEC61970::Base::Domain::ActivePower	minP
IEC61970::Base::Domain::ReactivePower	minQ
IEC61970::Base::Domain::ActivePower	p
IEC61970::Base::Domain::ReactivePower	q
IEC61970::Base::Domain::Resistance	r
IEC61970::Base::Domain::Resistance	r0
IEC61970::Base::Domain::Resistance	r2
IEC61970::Base::Domain::Boolean	regulationCapability
IEC61970::Base::Domain::Boolean	regulationStatus
IEC61970::Base::Domain::Voltage	regulationTarget
IEC61970::Base::Domain::Reactance	x
IEC61970::Base::Domain::Reactance	x0
IEC61970::Base::Domain::Reactance	x2
Public Attributes inherited from IEC61970::Base::Core::Equipment
IEC61970::Base::Domain::Boolean	aggregate
IEC61970::Base::Domain::Boolean	inService
IEC61970::Base::Domain::Boolean	networkAnalysisEnabled
IEC61970::Base::Domain::Boolean	normallyInService
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

This class represents equivalent injections (generation or load). Voltage regulation is allowed only at the point of connection.

Member Data Documentation

maxP

IEC61970::Base::Domain::ActivePower IEC61970::Base::Equivalents::EquivalentInjection::maxP

Maximum active power of the injection.

maxQ

IEC61970::Base::Domain::ReactivePower IEC61970::Base::Equivalents::EquivalentInjection::maxQ

Used for modeling of infeed for load flow exchange. Not used for short circuit modeling. If maxQ and minQ are not used ReactiveCapabilityCurve can be used.

minP

IEC61970::Base::Domain::ActivePower IEC61970::Base::Equivalents::EquivalentInjection::minP

Minimum active power of the injection.

minQ

IEC61970::Base::Domain::ReactivePower IEC61970::Base::Equivalents::EquivalentInjection::minQ

Used for modeling of infeed for load flow exchange. Not used for short circuit modeling. If maxQ and minQ are not used ReactiveCapabilityCurve can be used.

p

IEC61970::Base::Domain::ActivePower IEC61970::Base::Equivalents::EquivalentInjection::p

Equivalent active power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

q

IEC61970::Base::Domain::ReactivePower IEC61970::Base::Equivalents::EquivalentInjection::q

Equivalent reactive power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

r

IEC61970::Base::Domain::Resistance IEC61970::Base::Equivalents::EquivalentInjection::r

Positive sequence resistance. Used to represent Extended-Ward (IEC 60909). Usage : Extended-Ward is a result of network reduction prior to the data exchange.

r0

IEC61970::Base::Domain::Resistance IEC61970::Base::Equivalents::EquivalentInjection::r0

Zero sequence resistance. Used to represent Extended-Ward (IEC 60909). Usage : Extended-Ward is a result of network reduction prior to the data exchange.

r2

IEC61970::Base::Domain::Resistance IEC61970::Base::Equivalents::EquivalentInjection::r2

Negative sequence resistance. Used to represent Extended-Ward (IEC 60909). Usage : Extended-Ward is a result of network reduction prior to the data exchange.

regulationCapability

IEC61970::Base::Domain::Boolean IEC61970::Base::Equivalents::EquivalentInjection::regulationCapability

Specifies whether or not the EquivalentInjection has the capability to regulate the local voltage.

regulationStatus

IEC61970::Base::Domain::Boolean IEC61970::Base::Equivalents::EquivalentInjection::regulationStatus

Specifies the default regulation status of the EquivalentInjection. True is regulating. False is not regulating.

regulationTarget

IEC61970::Base::Domain::Voltage IEC61970::Base::Equivalents::EquivalentInjection::regulationTarget

The target voltage for voltage regulation.

x

IEC61970::Base::Domain::Reactance IEC61970::Base::Equivalents::EquivalentInjection::x

Positive sequence reactance. Used to represent Extended-Ward (IEC 60909). Usage : Extended-Ward is a result of network reduction prior to the data exchange.

x0

IEC61970::Base::Domain::Reactance IEC61970::Base::Equivalents::EquivalentInjection::x0

Zero sequence reactance. Used to represent Extended-Ward (IEC 60909). Usage : Extended-Ward is a result of network reduction prior to the data exchange.

x2

IEC61970::Base::Domain::Reactance IEC61970::Base::Equivalents::EquivalentInjection::x2

Negative sequence reactance. Used to represent Extended-Ward (IEC 60909). Usage : Extended-Ward is a result of network reduction prior to the data exchange.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Base/Equivalents/EquivalentInjection.h
• /home/lukas/acs/gits/CIM/17v23/refactored/IEC61970/Base/Equivalents/EquivalentInjection.cpp