IEC61970::Base::Wires::ShuntCompensator Class Reference

#include <ShuntCompensator.h>

Inheritance diagram for IEC61970::Base::Wires::ShuntCompensator:

Collaboration diagram for IEC61970::Base::Wires::ShuntCompensator:

Public Attributes
IEC61970::Base::Domain::Seconds	aVRDelay
IEC61970::Base::Domain::Boolean	grounded
IEC61970::Base::Domain::Integer	maximumSections
IEC61970::Base::Domain::Voltage	nomU
IEC61970::Base::Domain::Integer	normalSections
IEC61970::Base::Wires::PhaseShuntConnectionKind	phaseConnection
IEC61970::Base::Domain::Float	sections
IEC61970::Base::Domain::Integer	switchOnCount
IEC61970::Base::Domain::DateTime	switchOnDate
IEC61970::Base::Domain::VoltagePerReactivePower	voltageSensitivity
std::list< IEC61970::Base::Wires::ShuntCompensatorPhase * >	ShuntCompensatorPhase
Public Attributes inherited from IEC61970::Base::Wires::RegulatingCondEq
IEC61970::Base::Domain::Boolean	controlEnabled
IEC61970::Base::Wires::RegulatingControl *	RegulatingControl
Public Attributes inherited from IEC61970::Base::Core::Equipment
IEC61970::Base::Domain::Boolean	aggregate
IEC61970::Base::Domain::Boolean	normallyInService
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

A shunt capacitor or reactor or switchable bank of shunt capacitors or reactors. A section of a shunt compensator is an individual capacitor or reactor. A negative value for reactivePerSection indicates that the compensator is a reactor. ShuntCompensator is a single terminal device. Ground is implied.

Member Data Documentation

IEC61970::Base::Domain::Seconds IEC61970::Base::Wires::ShuntCompensator::aVRDelay

Time delay required for the device to be connected or disconnected by automatic voltage regulation (AVR).

IEC61970::Base::Domain::Boolean IEC61970::Base::Wires::ShuntCompensator::grounded

Used for Yn and Zn connections. True if the neutral is solidly grounded.

IEC61970::Base::Domain::Integer IEC61970::Base::Wires::ShuntCompensator::maximumSections

The maximum number of sections that may be switched in.

IEC61970::Base::Domain::Voltage IEC61970::Base::Wires::ShuntCompensator::nomU

The voltage at which the nominal reactive power may be calculated. This should normally be within 10% of the voltage at which the capacitor is connected to the network.

IEC61970::Base::Domain::Integer IEC61970::Base::Wires::ShuntCompensator::normalSections

The normal number of sections switched in.

IEC61970::Base::Wires::PhaseShuntConnectionKind IEC61970::Base::Wires::ShuntCompensator::phaseConnection

The type of phase connection, such as wye or delta.

IEC61970::Base::Domain::Float IEC61970::Base::Wires::ShuntCompensator::sections

Shunt compensator sections in use. Starting value for steady state solution. Non integer values are allowed to support continuous variables. The reasons for continuous value are to support study cases where no discrete shunt compensators has yet been designed, a solutions where a narrow voltage band force the sections to oscillate or accommodate for a continuous solution as input.

std::list<IEC61970::Base::Wires::ShuntCompensatorPhase*> IEC61970::Base::Wires::ShuntCompensator::ShuntCompensatorPhase

The individual phases models for the shunt compensator.

IEC61970::Base::Domain::Integer IEC61970::Base::Wires::ShuntCompensator::switchOnCount

The switch on count since the capacitor count was last reset or initialized.

IEC61970::Base::Domain::DateTime IEC61970::Base::Wires::ShuntCompensator::switchOnDate

The date and time when the capacitor bank was last switched on.

IEC61970::Base::Domain::VoltagePerReactivePower IEC61970::Base::Wires::ShuntCompensator::voltageSensitivity

Voltage sensitivity required for the device to regulate the bus voltage, in voltage/reactive power.

---

The documentation for this class was generated from the following files:

• IEC61970/Base/Wires/ShuntCompensator.h
• IEC61970/Base/Wires/ShuntCompensator.cpp