IEC61970::Base::Wires::EnergySource Class Reference

#include <EnergySource.h>

Inheritance diagram for IEC61970::Base::Wires::EnergySource:

Collaboration diagram for IEC61970::Base::Wires::EnergySource:

Public Attributes
IEC61970::Base::Domain::ActivePower	activePower
IEC61970::Base::Domain::Voltage	nominalVoltage
IEC61970::Base::Domain::Resistance	r
IEC61970::Base::Domain::Resistance	r0
IEC61970::Base::Domain::ReactivePower	reactivePower
IEC61970::Base::Domain::Resistance	rn
IEC61970::Base::Domain::AngleRadians	voltageAngle
IEC61970::Base::Domain::Voltage	voltageMagnitude
IEC61970::Base::Domain::Reactance	x
IEC61970::Base::Domain::Reactance	x0
IEC61970::Base::Domain::Reactance	xn
Public Attributes inherited from IEC61970::Base::Core::Equipment
IEC61970::Base::Domain::Boolean	aggregate
IEC61970::Base::Domain::Boolean	normallyInService
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

A generic equivalent for an energy supplier on a transmission or distribution voltage level.

Member Data Documentation

IEC61970::Base::Domain::ActivePower IEC61970::Base::Wires::EnergySource::activePower

High voltage source active injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

IEC61970::Base::Domain::Voltage IEC61970::Base::Wires::EnergySource::nominalVoltage

Phase-to-phase nominal voltage.

IEC61970::Base::Domain::Resistance IEC61970::Base::Wires::EnergySource::r

Positive sequence Thevenin resistance.

IEC61970::Base::Domain::Resistance IEC61970::Base::Wires::EnergySource::r0

Zero sequence Thevenin resistance.

IEC61970::Base::Domain::ReactivePower IEC61970::Base::Wires::EnergySource::reactivePower

High voltage source reactive injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for steady state solutions.

IEC61970::Base::Domain::Resistance IEC61970::Base::Wires::EnergySource::rn

Negative sequence Thevenin resistance.

IEC61970::Base::Domain::AngleRadians IEC61970::Base::Wires::EnergySource::voltageAngle

Phase angle of a-phase open circuit.

IEC61970::Base::Domain::Voltage IEC61970::Base::Wires::EnergySource::voltageMagnitude

Phase-to-phase open circuit voltage magnitude.

IEC61970::Base::Domain::Reactance IEC61970::Base::Wires::EnergySource::x

Positive sequence Thevenin reactance.

IEC61970::Base::Domain::Reactance IEC61970::Base::Wires::EnergySource::x0

Zero sequence Thevenin reactance.

IEC61970::Base::Domain::Reactance IEC61970::Base::Wires::EnergySource::xn

Negative sequence Thevenin reactance.

---

The documentation for this class was generated from the following files:

• IEC61970/Base/Wires/EnergySource.h
• IEC61970/Base/Wires/EnergySource.cpp