IEC61970::Base::Wires::EarthFaultCompensator Class Reference

#include <EarthFaultCompensator.h>

Inheritance diagram for IEC61970::Base::Wires::EarthFaultCompensator:

Collaboration diagram for IEC61970::Base::Wires::EarthFaultCompensator:

Public Attributes
IEC61970::Base::Domain::Resistance	r
Public Attributes inherited from IEC61970::Base::Core::Equipment
IEC61970::Base::Domain::Boolean	aggregate
IEC61970::Base::Domain::Boolean	normallyInService
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

A conducting equipment used to represent a connection to ground which is typically used to compensate earth faults.. An earth fault compensator device modeled with a single terminal implies a second terminal solidly connected to ground. If two terminals are modeled, the ground is not assumed and normal connection rules apply.

Member Data Documentation

IEC61970::Base::Domain::Resistance IEC61970::Base::Wires::EarthFaultCompensator::r

Nominal resistance of device.

---

The documentation for this class was generated from the following files:

• IEC61970/Base/Wires/EarthFaultCompensator.h
• IEC61970/Base/Wires/EarthFaultCompensator.cpp