#include <ExcSK.h>
Slovakian Excitation System Model. UEL and secondary voltage control are included in this model. When this model is used, there cannot be a separate underexcitation limiter or VAr controller model.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::efdmax |
Field voltage clipping limit (Efdmax).
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::efdmin |
Field voltage clipping limit (Efdmin).
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::emax |
Maximum field voltage output (Emax). Typical Value = 20.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::emin |
Minimum field voltage output (Emin). Typical Value = -20.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::k |
Gain (K). Typical Value = 1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::k1 |
Parameter of underexcitation limit (K1). Typical Value = 0.1364.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::k2 |
Parameter of underexcitation limit (K2). Typical Value = -0.3861.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kc |
PI controller gain (Kc). Typical Value = 70.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kce |
Rectifier regulation factor (Kce). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kd |
Exciter internal reactance (Kd). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kgob |
P controller gain (Kgob). Typical Value = 10.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kp |
PI controller gain (Kp). Typical Value = 1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kqi |
PI controller gain of integral component (Kqi). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kqob |
Rate of rise of the reactive power (Kqob).
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::kqp |
PI controller gain (Kqp). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::nq |
Dead band of reactive power (nq). Determines the range of sensitivity. Typical Value = 0.001.
IEC61970::Base::Domain::Boolean IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::qconoff |
Secondary voltage control state (Qc_on_off). true = secondary voltage control is ON false = secondary voltage control is OFF. Typical Value = false.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::qz |
Desired value (setpoint) of reactive power, manual setting (Qz).
IEC61970::Base::Domain::Boolean IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::remote |
Selector to apply automatic calculation in secondary controller model. true = automatic calculation is activated false = manual set is active; the use of desired value of reactive power (Qz) is required. Typical Value = true.
IEC61970::Base::Domain::ApparentPower IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::sbase |
Apparent power of the unit (Sbase). Unit = MVA. Typical Value = 259.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::tc |
PI controller phase lead time constant (Tc). Typical Value = 8.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::te |
Time constant of gain block (Te). Typical Value = 0.1.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::ti |
PI controller phase lead time constant (Ti). Typical Value = 2.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::tp |
Time constant (Tp). Typical Value = 0.1.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::tr |
Voltage transducer time constant (Tr). Typical Value = 0.01.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::uimax |
Maximum error (Uimax). Typical Value = 10.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::uimin |
Minimum error (UImin). Typical Value = -10.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::urmax |
Maximum controller output (URmax). Typical Value = 10.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::urmin |
Minimum controller output (URmin). Typical Value = -10.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::vtmax |
Maximum terminal voltage input (Vtmax). Determines the range of voltage dead band. Typical Value = 1.05.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::vtmin |
Minimum terminal voltage input (Vtmin). Determines the range of voltage dead band. Typical Value = 0.95.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcSK::yp |
Maximum output (Yp). Minimum output = 0. Typical Value = 1.