#include <ExcIEEEAC7B.h>

Inheritance diagram for IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B:

[legend]

Collaboration diagram for IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B:

[legend]

Public Attributes
IEC61970::Base::Domain::PU	kc

IEC61970::Base::Domain::PU	kd

IEC61970::Base::Domain::PU	kdr

IEC61970::Base::Domain::PU	ke

IEC61970::Base::Domain::PU	kf1

IEC61970::Base::Domain::PU	kf2

IEC61970::Base::Domain::PU	kf3

IEC61970::Base::Domain::PU	kia

IEC61970::Base::Domain::PU	kir

IEC61970::Base::Domain::PU	kl

IEC61970::Base::Domain::PU	kp

IEC61970::Base::Domain::PU	kpa

IEC61970::Base::Domain::PU	kpr

IEC61970::Base::Domain::Float	seve1

IEC61970::Base::Domain::Float	seve2

IEC61970::Base::Domain::Seconds	tdr

IEC61970::Base::Domain::Seconds	te

IEC61970::Base::Domain::Seconds	tf

IEC61970::Base::Domain::PU	vamax

IEC61970::Base::Domain::PU	vamin

IEC61970::Base::Domain::PU	ve1

IEC61970::Base::Domain::PU	ve2

IEC61970::Base::Domain::PU	vemin

IEC61970::Base::Domain::PU	vfemax

IEC61970::Base::Domain::PU	vrmax

IEC61970::Base::Domain::PU	vrmin

Public Attributes inherited from IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcitationSystemDynamics
IEC61970::Dynamics::StandardModels::SynchronousMachineDynamics::SynchronousMachineDynamics *	SynchronousMachineDynamics

Public Attributes inherited from IEC61970::Dynamics::StandardModels::DynamicsFunctionBlock
IEC61970::Base::Domain::Boolean	enabled

Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName

IEC61970::Base::Domain::String	description

IEC61970::Base::Domain::String	mRID

IEC61970::Base::Domain::String	name

std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

The class represents IEEE Std 421.5-2005 type AC7B model. The model represents excitation systems which consist of an ac alternator with either stationary or rotating rectifiers to produce the dc field requirements. It is an upgrade to earlier ac excitation systems, which replace only the controls but retain the ac alternator and diode rectifier bridge.

Reference: IEEE Standard 421.5-2005 Section 6.7.

Note: In the IEEE Standard 421.5 – 2005, the [1 / sT_E] block is shown as [1 / (1 + sT_E)], which is incorrect.

Member Data Documentation

◆ kc

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kc

Rectifier loading factor proportional to commutating reactance (K_C). Typical Value = 0.18.

◆ kd

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kd

Demagnetizing factor, a function of exciter alternator reactances (K_D). Typical Value = 0.02.

◆ kdr

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kdr

Voltage regulator derivative gain (K_DR). Typical Value = 0.

◆ ke

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::ke

Exciter constant related to self-excited field (K_E). Typical Value = 1.

◆ kf1

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kf1

Excitation control system stabilizer gain (K_F1). Typical Value = 0. 212.

◆ kf2

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kf2

Excitation control system stabilizer gain (K_F2). Typical Value = 0.

◆ kf3

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kf3

Excitation control system stabilizer gain (K_F3). Typical Value = 0.

◆ kia

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kia

Voltage regulator integral gain (K_IA). Typical Value = 59.69.

◆ kir

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kir

Voltage regulator integral gain (K_IR). Typical Value = 4.24.

◆ kl

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kl

Exciter field voltage lower limit parameter (K_L). Typical Value = 10.

◆ kp

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kp

Potential circuit gain coefficient (K_P). Typical Value = 4.96.

◆ kpa

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kpa

Voltage regulator proportional gain (K_PA). Typical Value = 65.36.

◆ kpr

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::kpr

Voltage regulator proportional gain (K_PR). Typical Value = 4.24.

◆ seve1

IEC61970::Base::Domain::Float IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::seve1

Exciter saturation function value at the corresponding exciter voltage, V_E1, back of commutating reactance (S_E[V_E1]). Typical Value = 0.44.

◆ seve2

IEC61970::Base::Domain::Float IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::seve2

Exciter saturation function value at the corresponding exciter voltage, V_E2, back of commutating reactance (S_E[V_E2]). Typical Value = 0.075.

◆ tdr

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::tdr

Lag time constant (T_DR). Typical Value = 0.

◆ te

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::te

Exciter time constant, integration rate associated with exciter control (T_E). Typical Value = 1.1.

◆ tf

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::tf

Excitation control system stabilizer time constant (T_F). Typical Value = 1.

◆ vamax

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::vamax

Maximum voltage regulator output (V_AMAX). Typical Value = 1.

◆ vamin

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::vamin

Minimum voltage regulator output (V_AMIN). Typical Value = -0.95.

◆ ve1

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::ve1

Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E1) equals V_EMAX (V_E1). Typical Value = 6.3.

◆ ve2

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::ve2

Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E2). Typical Value = 3.02.

◆ vemin

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::vemin

Minimum exciter voltage output (V_EMIN). Typical Value = 0.

◆ vfemax

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::vfemax

Exciter field current limit reference (V_FEMAX). Typical Value = 6.9.

◆ vrmax

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::vrmax

Maximum voltage regulator output (V_RMAX). Typical Value = 5.79.

◆ vrmin

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::ExcitationSystemDynamics::ExcIEEEAC7B::vrmin

Minimum voltage regulator output (V_RMIN). Typical Value = -5.79.

The documentation for this class was generated from the following files:

/home/lukas/acs/gits/CIM/17v07/refactored/IEC61970/Dynamics/StandardModels/ExcitationSystemDynamics/ExcIEEEAC7B.h
/home/lukas/acs/gits/CIM/17v07/refactored/IEC61970/Dynamics/StandardModels/ExcitationSystemDynamics/ExcIEEEAC7B.cpp

Public Attributes