IEC61970::Base::Wires::RatioTapChanger Class Reference

#include <RatioTapChanger.h>

Inheritance diagram for IEC61970::Base::Wires::RatioTapChanger:

Collaboration diagram for IEC61970::Base::Wires::RatioTapChanger:

Public Attributes
IEC61970::Base::Domain::PerCent	stepVoltageIncrement
IEC61970::Base::Wires::TransformerControlMode	tculControlMode = IEC61970::Base::Wires::TransformerControlMode::_undef
IEC61970::Base::Wires::RatioTapChangerTable *	RatioTapChangerTable
Public Attributes inherited from IEC61970::Base::Wires::TapChanger
IEC61970::Base::Domain::Boolean	controlEnabled
IEC61970::Base::Domain::Integer	highStep
IEC61970::Base::Domain::Seconds	initialDelay
IEC61970::Base::Domain::Integer	lowStep
IEC61970::Base::Domain::Boolean	ltcFlag
IEC61970::Base::Domain::Integer	neutralStep
IEC61970::Base::Domain::Voltage	neutralU
IEC61970::Base::Domain::Integer	normalStep
IEC61970::Base::Domain::Float	step
IEC61970::Base::Domain::Seconds	subsequentDelay
IEC61970::Base::Wires::TapChangerControl *	TapChangerControl
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

A tap changer that changes the voltage ratio impacting the voltage magnitude but not the phase angle across the transformer.

Member Data Documentation

RatioTapChangerTable

IEC61970::Base::Wires::RatioTapChangerTable* IEC61970::Base::Wires::RatioTapChanger::RatioTapChangerTable

The tap ratio table for this ratio tap changer.

stepVoltageIncrement

IEC61970::Base::Domain::PerCent IEC61970::Base::Wires::RatioTapChanger::stepVoltageIncrement

Tap step increment, in per cent of nominal voltage, per step position.

tculControlMode

IEC61970::Base::Wires::TransformerControlMode IEC61970::Base::Wires::RatioTapChanger::tculControlMode = IEC61970::Base::Wires::TransformerControlMode::_undef

Specifies the regulation control mode (voltage or reactive) of the RatioTapChanger.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM_SINERGIEN/20170705/refactored/IEC61970/Base/Wires/RatioTapChanger.h
• /home/lukas/acs/gits/CIM_SINERGIEN/20170705/refactored/IEC61970/Base/Wires/RatioTapChanger.cpp