IEC61970::Base::Wires::PowerTransformerEnd Class Reference

#include <PowerTransformerEnd.h>

Inheritance diagram for IEC61970::Base::Wires::PowerTransformerEnd:

Collaboration diagram for IEC61970::Base::Wires::PowerTransformerEnd:

Public Attributes
IEC61970::Base::Domain::Susceptance	b
IEC61970::Base::Domain::Susceptance	b0
IEC61970::Base::Wires::WindingConnection	connectionKind = IEC61970::Base::Wires::WindingConnection::_undef
IEC61970::Base::Domain::Conductance	g
IEC61970::Base::Domain::Conductance	g0
IEC61970::Base::Domain::Integer	phaseAngleClock
IEC61970::Base::Domain::Resistance	r
IEC61970::Base::Domain::Resistance	r0
IEC61970::Base::Domain::ApparentPower	ratedS
IEC61970::Base::Domain::Voltage	ratedU
IEC61970::Base::Domain::Reactance	x
IEC61970::Base::Domain::Reactance	x0
Public Attributes inherited from IEC61970::Base::Wires::TransformerEnd
IEC61970::Base::Domain::PerCent	bmagSat
IEC61970::Base::Domain::Integer	endNumber
IEC61970::Base::Domain::Boolean	grounded
IEC61970::Base::Domain::Voltage	magBaseU
IEC61970::Base::Domain::PerCent	magSatFlux
IEC61970::Base::Domain::Resistance	rground
IEC61970::Base::Domain::Reactance	xground
IEC61970::Base::Wires::PhaseTapChanger *	PhaseTapChanger
IEC61970::Base::Wires::TransformerStarImpedance *	StarImpedance
IEC61970::Base::Wires::RatioTapChanger *	RatioTapChanger
IEC61970::Base::Core::BaseVoltage *	BaseVoltage
IEC61970::Base::Core::Terminal *	Terminal
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

A PowerTransformerEnd is associated with each Terminal of a PowerTransformer. The impedance values r, r0, x, and x0 of a PowerTransformerEnd represents a star equivalent as follows 1) for a two Terminal PowerTransformer the high voltage PowerTransformerEnd has non zero values on r, r0, x, and x0 while the low voltage PowerTransformerEnd has zero values for r, r0, x, and x0. 2) for a three Terminal PowerTransformer the three PowerTransformerEnds represents a star equivalent with each leg in the star represented by r, r0, x, and x0 values. 3) for a PowerTransformer with more than three Terminals the PowerTransformerEnd impedance values cannot be used. Instead use the TransformerMeshImpedance or split the transformer into multiple PowerTransformers.

Member Data Documentation

b

IEC61970::Base::Domain::Susceptance IEC61970::Base::Wires::PowerTransformerEnd::b

Magnetizing branch susceptance (B mag). The value can be positive or negative.

b0

IEC61970::Base::Domain::Susceptance IEC61970::Base::Wires::PowerTransformerEnd::b0

Zero sequence magnetizing branch susceptance.

connectionKind

IEC61970::Base::Wires::WindingConnection IEC61970::Base::Wires::PowerTransformerEnd::connectionKind = IEC61970::Base::Wires::WindingConnection::_undef

Kind of connection.

g

IEC61970::Base::Domain::Conductance IEC61970::Base::Wires::PowerTransformerEnd::g

Magnetizing branch conductance.

g0

IEC61970::Base::Domain::Conductance IEC61970::Base::Wires::PowerTransformerEnd::g0

Zero sequence magnetizing branch conductance (star-model).

phaseAngleClock

IEC61970::Base::Domain::Integer IEC61970::Base::Wires::PowerTransformerEnd::phaseAngleClock

Terminal voltage phase angle displacement where 360 degrees are represented with clock hours. The valid values are 0 to 11. For example, for the secondary side end of a transformer with vector group code of 'Dyn11', specify the connection kind as wye with neutral and specify the phase angle of the clock as

1. The clock value of the transformer end number specified as 1, is assumed to be zero. Note the transformer end number is not assumed to be the same as the terminal sequence number.

r

IEC61970::Base::Domain::Resistance IEC61970::Base::Wires::PowerTransformerEnd::r

Resistance (star-model) of the transformer end. The attribute shall be equal or greater than zero for non-equivalent transformers.

r0

IEC61970::Base::Domain::Resistance IEC61970::Base::Wires::PowerTransformerEnd::r0

Zero sequence series resistance (star-model) of the transformer end.

ratedS

IEC61970::Base::Domain::ApparentPower IEC61970::Base::Wires::PowerTransformerEnd::ratedS

Normal apparent power rating. The attribute shall be a positive value. For a two-winding transformer the values for the high and low voltage sides shall be identical.

ratedU

IEC61970::Base::Domain::Voltage IEC61970::Base::Wires::PowerTransformerEnd::ratedU

Rated voltage: phase-phase for three-phase windings, and either phase-phase or phase-neutral for single-phase windings. A high voltage side, as given by TransformerEnd.endNumber, shall have a ratedU that is greater or equal than ratedU for the lower voltage sides.

x

IEC61970::Base::Domain::Reactance IEC61970::Base::Wires::PowerTransformerEnd::x

Positive sequence series reactance (star-model) of the transformer end.

x0

IEC61970::Base::Domain::Reactance IEC61970::Base::Wires::PowerTransformerEnd::x0

Zero sequence series reactance of the transformer end.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/16v29a_12v08/refactored/IEC61970/Base/Wires/PowerTransformerEnd.h
• /home/lukas/acs/gits/CIM/16v29a_12v08/refactored/IEC61970/Base/Wires/PowerTransformerEnd.cpp