IEC61970::Base::Wires::PhaseTapChangerAsymmetrical Class Reference

#include <PhaseTapChangerAsymmetrical.h>

Inheritance diagram for IEC61970::Base::Wires::PhaseTapChangerAsymmetrical:

Collaboration diagram for IEC61970::Base::Wires::PhaseTapChangerAsymmetrical:

Public Attributes
IEC61970::Base::Domain::AngleDegrees	windingConnectionAngle
Public Attributes inherited from IEC61970::Base::Wires::PhaseTapChangerNonLinear
IEC61970::Base::Domain::PerCent	voltageStepIncrement
IEC61970::Base::Domain::Reactance	xMax
IEC61970::Base::Domain::Reactance	xMin
Public Attributes inherited from IEC61970::Base::Wires::TapChanger
IEC61970::Base::Domain::Boolean	controlEnabled
IEC61970::Base::Domain::Integer	highStep
IEC61970::Base::Domain::Seconds	initialDelay
IEC61970::Base::Domain::Integer	lowStep
IEC61970::Base::Domain::Boolean	ltcFlag
IEC61970::Base::Domain::Integer	neutralStep
IEC61970::Base::Domain::Voltage	neutralU
IEC61970::Base::Domain::Integer	normalStep
IEC61970::Base::Domain::Float	step
IEC61970::Base::Domain::Seconds	subsequentDelay
IEC61970::Base::Wires::TapChangerControl *	TapChangerControl
Public Attributes inherited from IEC61970::Base::Core::PowerSystemResource
std::list< IEC61970::Base::Meas::Control * >	Controls
std::list< IEC61970::Base::Meas::Measurement * >	Measurements
IEC61970::Base::Core::PSRType *	PSRType
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

Describes the tap model for an asymmetrical phase shifting transformer in which the difference voltage vector adds to the primary side voltage. The angle between the primary side voltage and the difference voltage is named the winding connection angle. The phase shift depends on both the difference voltage magnitude and the winding connection angle.

Member Data Documentation

windingConnectionAngle

IEC61970::Base::Domain::AngleDegrees IEC61970::Base::Wires::PhaseTapChangerAsymmetrical::windingConnectionAngle

The phase angle between the in-phase winding and the out-of -phase winding used for creating phase shift. The out-of-phase winding produces what is known as the difference voltage. Setting this angle to 90 degrees is not the same as a symmemtrical transformer.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/16v29a_12v08/refactored/IEC61970/Base/Wires/PhaseTapChangerAsymmetrical.h
• /home/lukas/acs/gits/CIM/16v29a_12v08/refactored/IEC61970/Base/Wires/PhaseTapChangerAsymmetrical.cpp