IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo Class Reference

#include <SurgeArresterInfo.h>

Inheritance diagram for IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo:

Collaboration diagram for IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo:

Public Attributes
IEC61970::Base::Domain::Voltage	continuousOperatingVoltage
IEC61970::Base::Domain::Boolean	isPolymer
IEC61970::Base::Domain::Voltage	lightningImpulseDischargeVoltage
IEC61970::Base::Domain::Integer	lineDischargeClass
IEC61970::Base::Domain::CurrentFlow	nominalDischargeCurrent
IEC61970::Base::Domain::CurrentFlow	pressureReliefClass
IEC61970::Base::Domain::Voltage	ratedVoltage
IEC61970::Base::Domain::Voltage	steepFrontDischargeVoltage
IEC61970::Base::Domain::Voltage	switchingImpulseDischargeVoltage
Public Attributes inherited from IEC61968::Assets::AssetInfo
std::list< IEC61970::Base::Core::PowerSystemResource * >	PowerSystemResources
Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String	aliasName
IEC61970::Base::Domain::String	description
IEC61970::Base::Domain::String	mRID
IEC61970::Base::Domain::String	name
std::list< IEC61970::Base::DiagramLayout::DiagramObject * >	DiagramObjects

Detailed Description

Properties of surge arrester.

Member Data Documentation

continuousOperatingVoltage

IEC61970::Base::Domain::Voltage IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::continuousOperatingVoltage

Maximum continuous power frequency voltage allowed on the surge arrester.

isPolymer

IEC61970::Base::Domain::Boolean IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::isPolymer

If true, the arrester has a polymer housing, porcelain otherwise.

lightningImpulseDischargeVoltage

IEC61970::Base::Domain::Voltage IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::lightningImpulseDischargeVoltage

Residual voltage during an 8x20 microsecond current impulse at the nominal discharge current level.

lineDischargeClass

IEC61970::Base::Domain::Integer IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::lineDischargeClass

Determines the arrester energy discharge capability. Choices are limited to 0 (none) through 5 (highest) by IEC 60099. Classes 1..3 require a 10-kA nominal discharge current. Classes 4..5 require a 20-kA nominal discharge current. Lower nominal discharge currents must use class 0.

nominalDischargeCurrent

IEC61970::Base::Domain::CurrentFlow IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::nominalDischargeCurrent

The lightning discharge current used to classify the arrester. Choices are limited to 1.5, 2.5, 5, 10, and 20 kA by IEC 60099.

pressureReliefClass

IEC61970::Base::Domain::CurrentFlow IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::pressureReliefClass

Fault current level at which all parts of the failed arrester lie within a circle prescribed by IEC 60099.

ratedVoltage

IEC61970::Base::Domain::Voltage IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::ratedVoltage

The temporary overvoltage (TOV) level at power frequency that the surge arrester withstands for 10 seconds.

steepFrontDischargeVoltage

IEC61970::Base::Domain::Voltage IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::steepFrontDischargeVoltage

Residual voltage during a current impulse with front time of 1 microsecond, and magnitude equal to the nominal discharge current level.

switchingImpulseDischargeVoltage

IEC61970::Base::Domain::Voltage IEC61968::InfIEC61968::InfAssetInfo::SurgeArresterInfo::switchingImpulseDischargeVoltage

Residual voltage during a current impulse with front time of at least 30 microseconds, and magnitude specified in IEC 60099 for the line discharge class. Does not apply to line discharge class 0.

---

The documentation for this class was generated from the following files:

• /home/lukas/acs/gits/CIM/16v29a_12v08/refactored/IEC61968/InfIEC61968/InfAssetInfo/SurgeArresterInfo.h
• /home/lukas/acs/gits/CIM/16v29a_12v08/refactored/IEC61968/InfIEC61968/InfAssetInfo/SurgeArresterInfo.cpp