#include <GovSteamFV4.h>
Detailed electro-hydraulic governor for steam unit.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::cpsmn |
Minimum value of pressure regulator output (Cpsmn). Typical Value = -1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::cpsmx |
Maximum value of pressure regulator output (Cpsmx). Typical Value = 1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::crmn |
Minimum value of regulator set-point (Crmn). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::crmx |
Maximum value of regulator set-point (Crmx). Typical Value = 1.2.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kdc |
Derivative gain of pressure regulator (Kdc). Typical Value = 1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kf1 |
Frequency bias (reciprocal of droop) (Kf1). Typical Value = 20.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kf3 |
Frequency control (reciprocal of droop) (Kf3). Typical Value = 20.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::khp |
Fraction of total turbine output generated by HP part (Khp). Typical Value = 0.35.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kic |
Integral gain of pressure regulator (Kic). Typical Value = 0.0033.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kip |
Integral gain of pressure feedback regulator (Kip). Typical Value = 0.5.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kit |
Integral gain of electro-hydraulic regulator (Kit). Typical Value = 0.04.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kmp1 |
First gain coefficient of intercept valves characteristic (Kmp1). Typical Value = 0.5.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kmp2 |
Second gain coefficient of intercept valves characteristic (Kmp2). Typical Value = 3.5.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kpc |
Proportional gain of pressure regulator (Kpc). Typical Value = 0.5.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kpp |
Proportional gain of pressure feedback regulator (Kpp). Typical Value = 1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::kpt |
Proportional gain of electro-hydraulic regulator (Kpt). Typical Value = 0.3.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::krc |
Maximum variation of fuel flow (Krc). Typical Value = 0.05.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::ksh |
Pressure loss due to flow friction in the boiler tubes (Ksh). Typical Value = 0.08.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::lpi |
Maximum negative power error (Lpi). Typical Value = -0.15.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::lps |
Maximum positive power error (Lps). Typical Value = 0.03.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::mnef |
Lower limit for frequency correction (MNEF). Typical Value = -0.05.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::mxef |
Upper limit for frequency correction (MXEF). Typical Value = 0.05.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::pr1 |
First value of pressure set point static characteristic (Pr1). Typical Value = 0.2.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::pr2 |
Second value of pressure set point static characteristic, corresponding to Ps0 = 1.0 PU (Pr2). Typical Value = 0.75.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::psmn |
Minimum value of pressure set point static characteristic (Psmn). Typical Value = 1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::rsmimn |
Minimum value of integral regulator (Rsmimn). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::rsmimx |
Maximum value of integral regulator (Rsmimx). Typical Value = 1.1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::rvgmn |
Minimum value of integral regulator (Rvgmn). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::rvgmx |
Maximum value of integral regulator (Rvgmx). Typical Value = 1.2.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::srmn |
Minimum valve opening (Srmn). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::srmx |
Maximum valve opening (Srmx). Typical Value = 1.1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::srsmp |
Intercept valves characteristic discontinuity point (Srsmp). Typical Value = 0. 43.
IEC61970::Base::Domain::Float IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::svmn |
Maximum regulator gate closing velocity (Svmn). Typical Value = -0.0333.
IEC61970::Base::Domain::Float IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::svmx |
Maximum regulator gate opening velocity (Svmx). Typical Value = 0.0333.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::ta |
Control valves rate opening time (Ta). Typical Value = 0.8.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tam |
Intercept valves rate opening time (Tam). Typical Value = 0.8.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tc |
Control valves rate closing time (Tc). Typical Value = 0.5.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tcm |
Intercept valves rate closing time (Tcm). Typical Value = 0.5.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tdc |
Derivative time constant of pressure regulator (Tdc). Typical Value = 90.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tf1 |
Time constant of fuel regulation (Tf1). Typical Value = 10.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tf2 |
Time constant of steam chest (Tf2). Typical Value = 10.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::thp |
High pressure (HP) time constant of the turbine (Thp). Typical Value = 0.15.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tmp |
Low pressure (LP) time constant of the turbine (Tmp). Typical Value = 0.4.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::trh |
Reheater time constant of the turbine (Trh). Typical Value = 10.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::tv |
Boiler time constant (Tv). Typical Value = 60.
IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::ty |
Control valves servo time constant (Ty). Typical Value = 0.1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::y |
Coefficient of linearized equations of turbine (Stodola formulation) (Y). Typical Value = 0.13.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::yhpmn |
Minimum control valve position (Yhpmn). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::yhpmx |
Maximum control valve position (Yhpmx). Typical Value = 1.1.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::ympmn |
Minimum intercept valve position (Ympmn). Typical Value = 0.
IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::TurbineGovernorDynamics::GovSteamFV4::ympmx |
Maximum intercept valve position (Ympmx). Typical Value = 1.1.