CIM++ Adapted CIM_SINERGIEN Codebase
Public Attributes | List of all members
IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor Class Reference

#include <LoadMotor.h>

Inheritance diagram for IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor:
Inheritance graph
[legend]
Collaboration diagram for IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor:
Collaboration graph
[legend]

Public Attributes

IEC61970::Base::Domain::Float d
 
IEC61970::Base::Domain::Seconds h
 
IEC61970::Base::Domain::Float lfac
 
IEC61970::Base::Domain::PU lp
 
IEC61970::Base::Domain::PU lpp
 
IEC61970::Base::Domain::PU ls
 
IEC61970::Base::Domain::Float pfrac
 
IEC61970::Base::Domain::PU ra
 
IEC61970::Base::Domain::Seconds tbkr
 
IEC61970::Base::Domain::Seconds tpo
 
IEC61970::Base::Domain::Seconds tppo
 
IEC61970::Base::Domain::Seconds tv
 
IEC61970::Base::Domain::PU vt
 
IEC61970::Dynamics::StandardModels::LoadDynamics::LoadAggregateLoadAggregate
 
- Public Attributes inherited from IEC61970::Base::Core::IdentifiedObject
IEC61970::Base::Domain::String aliasName
 
IEC61970::Base::Domain::String description
 
IEC61970::Base::Domain::String mRID
 
IEC61970::Base::Domain::String name
 
std::list< IEC61970::Base::DiagramLayout::DiagramObject * > DiagramObjects
 

Detailed Description

Aggregate induction motor load. This model is used to represent a fraction of an ordinary load as "induction motor load". It allows load that is treated as ordinary constant power in power flow analysis to be represented by an induction motor in dynamic simulation. If Lpp = 0. or Lpp = Lp, or Tppo = 0., only one cage is represented. Magnetic saturation is not modelled. Either a "one-cage" or "two-cage" model of the induction machine can be modelled. Magnetic saturation is not modelled.

This model is intended for representation of aggregations of many motors dispersed through a load represented at a high voltage bus but where there is no information on the characteristics of individual motors.

This model treats a fraction of the constant power part of a load as a motor. During initialisation, the initial power drawn by the motor is set equal to Pfrac times the constant P part of the static load. The remainder of the load is left as static load.

The reactive power demand of the motor is calculated during initialisation as a function of voltage at the load bus. This reactive power demand may be less than or greater than the constant Q component of the load. If the motor's reactive demand is greater than the constant Q component of the load, the model inserts a shunt capacitor at the terminal of the motor to bring its reactive demand down to equal the constant Q reactive load. If a motor model and a static load model are both present for a load, the motor Pfrac is assumed to be subtracted from the power flow constant P load before the static load model is applied. The remainder of the load, if any, is then represented by the static load model.

Member Data Documentation

IEC61970::Base::Domain::Float IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::d

Damping factor (D). Unit = delta P/delta speed. Typical Value = 2.

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::h

Inertia constant (H) (not=0). Typical Value = 0.4.

IEC61970::Base::Domain::Float IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::lfac

Loading factor – ratio of initial P to motor MVA base (Lfac). Typical Value = 0.8.

IEC61970::Dynamics::StandardModels::LoadDynamics::LoadAggregate* IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::LoadAggregate

Aggregate load to which this aggregate motor (dynamic) load belongs.

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::lp

Transient reactance (Lp). Typical Value = 0.15.

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::lpp

Subtransient reactance (Lpp). Typical Value = 0.15.

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::ls

Synchronous reactance (Ls). Typical Value = 3.2.

IEC61970::Base::Domain::Float IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::pfrac

Fraction of constant-power load to be represented by this motor model (Pfrac) (>=0.0 and <=1.0). Typical Value = 0.3.

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::ra

Stator resistance (Ra). Typical Value = 0.

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::tbkr

Circuit breaker operating time (Tbkr). Typical Value = 0.08.

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::tpo

Transient rotor time constant (Tpo) (not=0). Typical Value = 1.

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::tppo

Subtransient rotor time constant (Tppo). Typical Value = 0.02.

IEC61970::Base::Domain::Seconds IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::tv

Voltage trip pickup time (Tv). Typical Value = 0.1.

IEC61970::Base::Domain::PU IEC61970::Dynamics::StandardModels::LoadDynamics::LoadMotor::vt

Voltage threshold for tripping (Vt). Typical Value = 0.7.


The documentation for this class was generated from the following files: